VXDIAG VCX NANO

Showing posts with label vxdiag vcx nano. Show all posts

1/11/2023

VXDIAG VX Manager, Firmware, License and Driver Update

Here is the newbie instruction to update VXDIAG VX Manager, Firmware, License and Drivers. The instructions can be applied to all VXDIAG VCX NANO, VCX SE and VCX Plus diagnostic tools.

How to Update VXDIAG VX Manager?

Visit www.vxdiag.net official website and download the latest version vx manager driver.

or download here directly

http://www.vxdiag.net/managecenter/download/vxdiag.zip

Here is current version 1.8.9 on Mega as well.

https://mega.nz/file/udohRDTb#xrt4ui1A2yh0GnOWHPmm2jsAdD7PU3G7vcU2K3tCtYA

Then install vx manager.

(Install it on Win7, Win8, Win10. WinXP is not supported).

How to Install and Update VXDIAG Device Driver?

Connect vcx nano/vcx se or vcx plus with laptop via USB cable

Go to the Diagnostic tab in vx manager.
Make sure your Passthru and corresponding device driver are installed.

update vxdiag vx manager device driver 0

If not installed, press icon and “Install” it.

If there is a purple icon of the driver which means there is a new software version update that needs newer driver support.
Press the corresponding driver and Update driver.

update vxdiag vx manager device driver 1

update vxdiag vx manager device driver 2

How to Update VXDIAG Scanner Firmware?

After installing latest vx manager, connect press Firmware upgrade

Check if there is a new VCI update, Press Yes to update
If it is DoIP device, update both VCI and DoIP firmware.

How to Update VXDIAG License?
Press “Update License”

NOTE: Always update firmware first, then update license afterwards.

Check when your license will expire in “Licenses” tab.

Vxdiag license should be renewed every 60 days starting from year 2021.

Renew license requires update vxdiag vci firmware as well.

Some Common errors and solutions about vx manager firmware, license and diver:

1). If vx manager has error “Updated license failed! Retry. ErrorCode:8001”

Make sure you have updated both VCI and DoIP firmware.

Then update firmware and license again. Sometimes need to update firmware and license for several times to set it up.

2). No device in vx manager

1. Please check if the vx manager is newest v1.8.9 version. If not, please uninstall old version, then download new version from www.vxdiag.net. Install the new version vx manager to try again.

2. If still no device, please change USB port or USB cable to try.

3. Disconnect device from laptop and car, after 3 minutes, connect again.

4. Please open Network connection on control panel, find Ethernet (Realtek USB FE Family Controller), check the IP address is correct. Correct IP should be 192.168.171.1 or 192.168.8.1.If IP is not correct, need to reset firmware.

3). Error : “The device license for this application is invalid or expired ” when install device driver.

VX Manager manager is too old. Update to latest version and try again.

4). License invalid, please update VCI.

Solution: The error is usually caused by missing license. Check available license in “Licenses” area
If cannot see your license, contact your dealer to add license to your vcx se.

5). Not Found Device or License.

Solution: It is driver problem Update firmware in vx manager.

Then re-install devicedriver.

6). Update license Failed. Error 4001
There was an error communicating with the server.

Solution: Always update the firmware first, then update license.

8/12/2018

How to get VXDIAG VCX NANO Ford to work with FORScan

Here, I’d like to feedback something I’ve tried with Allscanner VXDIAG VCX NANO Ford diagnostic tool and FORScan software.

I can add FORScan regarding the VXDIAG VCX Nano for Ford/Mazda. I took mine apart and no bluetooth module is present. The bluetooth capabilities advertised on the main Allscanner site it not accurate. I can not speak for the WIFI version but I have the USB version and have used it with my 2003 Mazda 6 V6 and AFTER installing the “pass-thru” driver (J2534) it works perfectly and fast with FORSCAN.

The VCX Nano I took apart seems to be a custom design to emulate in hardware part of the hardware/software of the VCM II but the driver is most important too. I did not take pictures but gently peeling down the stickers reveals 4 screws. Once inside it is a very simple board with a ST micro cortex M4 STM32F4 Series based micro controller doing the work. The FT serial to usb chip-set and some caps and a space that was blank for I assume either the WIFI or Bluetooth module. I googled the device and did see a Russian site where a guy took apart a VW version and it had more chips and and older generation micro-controller.
Soldering looks like reasonable quality surface mount and no hand work or redo’s.

First of all install VCXManager and this driver:

And second configure ForScan how this image:

Its run perfectly

Note that please update your VCXmanager and drivers to the latest version.

www.obdii365.com

http://blog.obdii365.com/2018/08/13/vxdiag-vcx-nano-ford-works-with-forscan-software/

1/01/2018

How to install ODIS 4.23 with VAS 6154 Interface

Guide: How to install ODIS software with VAS 6154 diagnostic interface. VAS6154 China clone is the improved version of VXDIAG VCX NANO (all made by Allscanner company). VAS6154 supports connection via USB and WiFi. Connection via WiFi is more stable than that via Bluetooth

VAS 6154 interface comes with best firmware and quality blue board.

VAS 6154 only works with ODIS 3.0.3 or newer. Cannot support VAS-PC V19

ps. VAS 5054A vs. VAS6154
VAS 5054A can work with odis new or old

VAS5054a support USB and Bluetooth connection
Stable only with Oki Chip and Bluetooth Chip AMB2300

Vas6154 supports USB and WiFi connection

How to Install Odis with China Clone Vas 6154?

1. Format c:\
2. Install Win 7 (64)
3. Install ALL DRIVER !!!
4. Defender + Firewall and all Virus Prog. OFF
5. Use 3.0.3 or above Odis 4.23 latest version (software CD or download from other resources
6. Install as admin