VXDIAG VCX Plus Ford multi tool is verified working no issue with original IDS license.
Tested model:
Ford Focus year 2013 2.0L gasoline
Intention:
Reprogram PCM after replacement and program PATS key
Connect VXDIAG Ford VCi with vehicle via OBD socket
Read vehicle information
Select module programming
The PCM installed to this vehicle is blank. Enter the VIN on the next screen
Gathering vehicle data
Turn on ignition switch
PCM Module programming in progress
Turn ignition to the ON position
Enter PATS Security access
Advanced key code Erase and Program
Program additional key
Parameter reset (BCM and PCM)
Parameter reset (BCM and RFA)
Program additional transponder key (for remote start installations only)
You will need 2 keys to start the vehicle
Program first transponder key
Put key in slot on steering column
Put key in slot on steering column
Operation success
Follow same step to program next key until success
Check vehicle information and test the new key.
VXDIAG is compatible with original diagnostic software and newer vehicles. You can purchase license from Ford or obdii365.com.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.