How to Set up Vediamo 5.01.01 for VXDIAG VCX SE?

 Some users follow the forum guide to set up the VXDIAG VCX SE Benz with Vediamo 5.1. Vediamo will recognize the VXDIAG but when connecting to ECU module (i.e MED40), they will get the error that the connection with the ECU cannot be established.

Here is the clue.

Vediamo 5.01.01 need a special fix file (slave file) to configure as J2534.

 

Here we share the Vediamo 5.01.01 software with a salve file for VXDIAG scanners.

vediamo 5.01.01 for vxdiag

Only this you need.
Vediamo/Cesaer/Driver – copy paste the file here and replace him
In program files (x86)Vediamo/Cesaer/Driver – copy paste the file here and replace him
And then connect the device run as administrator Vediamo
Update and select only eCom port
Again Update.

Job finish.

Tested VXDIAG working well with Xentry 12/2023. You can use the CBF files from Xentry with Vediamo.

Our engineer tested on Mercedes ME9.7 ECU.  Works great.

How to Enable VXDIAG VCX SE Benz with Xentry Passthru?

 VXDIAG VCX SE Benz can work on Benz C6 mode with Xentry OpenShell. It can also work on Passthru Mode.  Here is the tip to set up vxdiag vcx se Benz to work on Passthru mode with Xnetry, DTS Monaco and Vediamo.

 

Benefits of the vcx se over Openport as Passthru:

• The main reason for buying vxddag is that it has DoIP for new cars.
• vcx se connects via WiFi and it’s very convenient
  there is already a Type C connector and it is held very tightly
• vxdiag will also work on Passthru Mode
• vxdiag allows firmware update and being able to add other brands to the device

We will show you how to install drivers and connect via WiFi.  There is no difference through the cable USB connection.  We already tested the speed connections both via cable and via WiFi.

It is the same.

 

VXDIAG VCX SE Driver Setup for MB Xentry PassThru J2534:

First of all, download the latest version of the driver vx manager here

VX Manager driver 1.8.6

 

Install vx manager

It has many programs to install. In this case, we install Passthru-J2534 program only.

vcx se was connected, vx manager detects device information

Passthru driver has been installed. DON’T install Benz C6 driver. If you have installed C6 driver, Uninstall it.
Update License
Update Firmware

Pair vcx se with WiFi
WiFi password is :123456

ReConnect Device

Connect vcx se benz with vehicle via OBD socket

Run Xentry Diagnosis program

Choose vxdiag-j2534 as passthru device

You can start diagnosis and coding with vcx se passthru software.

 

Disclaimer: We don’t have Xentry passthru software for sale. If you want to use Vxdiag passthru with Mercedes you need to buy a full Mercedes license. Vxdiag passthru license is not a general j2534 license for all brands.

www.obdii365.com

http://blog.obdii365.com/2022/02/14/set-up-vxdiag-vcx-se-benz-as-xentry-passthru/