Here is the instruction on how to install Tech2Win 11.27 software for VXDIAG VCX NANO GM/OPELscanner. And also, obd365 technicians tested/ diagnosed VXDIAG VCX NANO GM on North American BUICK (A)2010 passenger car, via WIFI wireless or USB connection.
Operating system: Windows XP, Win7, Win8 32bit and 64bit
Language: English
VXDIAG GM Tech2Win Video guide:
STEPS:
Preparation
Step 1 install MDI
Step 2 install Tech2Win
Step 3 install VX Manager
Step 4 local network connection
Step 5 install GM GDS2/Tech3
Step 6 Tech2Win-Wired diagnosis on American BUICK 2010
Step 7 VCX-WiFi connection
Step 8 Setup Wlan connection in VX Manager
Step 9 Tech2Win-Wireless diagnosis on American BUICK 2010
Step 10 Tech2Win-Wireless diagnosis on others
Preparation
Open Computer>>(F:) VXDIAG GM.
Extract zip file “Tech2Win11.27” (extraction path: Desktop)
Copy “VX Manager 1.0.6.110” to Desktop.
Step 1 install MDI
Go to Desktop, open folder Tech2Win11.27>>AutoInstall.
Installing MDI…
Prepare to install…
Click Next to install GM MDI Software-8.1.135.13 on your computer.
Click Next.
Click Install to begin installation.
Installing GM MDI Software…
MDI install OK. Click OK.
Step 2 install Tech2Win
Click Next to install Tech2Win.
Tick on “I accept…”, and click Next.
Click Next.
Click Install to begin installation.
Intsalling Tech2Win…
(Windows secutiy: Install this driver software anyway)
Installing virtual com port driver…
Completed the Tech2Win setup wizzard. click Finish
Intsalling Tech2Win…
Tech2Win install OK. Click OK.
Click Close.
Step 3 install VX Manager
Go to Desktop, open VX Manager 1.0.6.110.
Click Next to install VX Manager version 1.0.6.110.
Tick on “I accept…”, and click Next.
Click Next.
Installing VX Manager…
Click Finish when VX Manager installation success.
Step 4 local network connection
Connect to a Network.
Network Location: Work network.
Network Location is now work. Click Close.
Step 5 install GM GDS2/Tech3
Open VX Manager on Desktop.
Select Configure.
Connection type: USB.
Go to Diagnostic Apps.
Click GM GDS2/Tech3.
Click Install.
VCX PDU driver (GM MDI) install complete. Click Close.
Close the small interface of GM GDS2/Tech3.
Go to Online Apps, read and close VX Manager.
Step 6 Tech2Win-Wired diagnosis on Amercian BUICK 2010
Open Tech2Win on Desktop.
Configuration: select North American.
Select the interface you want to use:221222456_USB. Click OK.
Maximize the tech2 screen.
Click ENTER.
F0: Diagnostics. Click ENTER.
Model Years: (A) 2010.
Vehicle Types: Passenger Car. Click ENTER.
Product Makes: Buick.
Product Lines: H.
Diagnostics: FO: Powertrain. Click ENTER.
Engine Type: (1) 3.9L V6 LZ9
F0: Engine Control Module. Click ENTER.
FO: Diagnostic Trouble Codes (DTC). Click ENTER.
F0: DCT Display. Click ENTER.
Eatablishing communications… Click ENTER.
(Tech2Win interface will close automatically)
Again open Tech2Win on Desktop, and repete the procedures above to Eatablishing communications.
Click ENTER.
ECU Name: ECM. Click ENTER.
Click View All DTCs.
Click PWR.
Step 7 VCX-WiFi connection
Connect VCX-WiFi.
Network Location: Work network.
Network Location is now work. Click Close.
Step 8 Setup Wlan connection in VX Manager
Open VX Manager on Desktop.
Click Configure.
Connection Type: WLAN, click OK.
Configuration has been saved, restart the program. Click OK.
Again, open VX Manager.
Go to Configure, to check the Connection Type.
Close VX Manager.
Step 9 Tech2Win-Wireless diagnosis on American BUICK 2010
(do the same selection as wired diagnosis)
Open Tech2Win on Desktop.
Configuration: select North American.
Select the interface you want to use:221222456_USB. Click OK.
Maximize the tech2 screen.
Click ENTER.
F0: Diagnostics. Click ENTER.
Model Years: (A) 2010.
Vehicle Types: Passenger Car. Click ENTER.
Product Makes: Buick.
Product Lines: H.
Diagnostics: FO: Powertrain. Click ENTER.
Engine Type: (1) 3.9L V6 LZ9
F0: Engine Control Module. Click ENTER.
FO: Diagnostic Trouble Codes (DTC). Click ENTER.
F0: DCT Display. Click ENTER.
Establishing communications… Click ENTER.
ECU Name: ECM. Click ENTER.
Click View All DTCs.
(DTCs display via WIFI is the same as wireless connection)
Click PWR.
Step 10 Tech2Win-Wireless diagnosis on others
Open Tech2Win on Desktop.
Configuration:
obd365 technicians has tested different Tech2Win configurations.
Done.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.