VXDIAG VCX SE and VNCI RNM which is a better Nissan diagnostic scanner for module programming?
The device does support online programming with software subscription.
If VXDIAG fails to program modules online. C3+ Software version might be the problem.
Obdii365.com here shares a case study of one of our customers.
He bought a VXDIAG VCX SE device with Nissan license activated.
Tested it on a Qashqai J11 MY2013- diagnosis everything works fine.
He registered with the MERS. Then started the procedure of module reprogramming the VCX SE head in Consult III Plus 226.50:
Go to Programming and Configuration – Engine – Programming and initialize internal combustion engine
Consult3+ finds 2 firmware updates for the engine
The consult3 plus makes sure that everything is normal and you can proceed.
Then, after launching the firmware, the fan on the radiator started and remove the chip from it so as not to drain the battery.
This is where everything froze, waited for the promised 15 minutes for about an hour or a little more. No luck.
Without waiting for the end of the process, he quit and the Consult3 plus software threw out an error (“Reprogramming SCF Error”).
He repeated it again, waited for about 2 hours – it was stuck in exactly the same place.
He contacted our customer service for help. VXDIAG engineer did a teamviewer check and confirmed it was a software issue. VXDIAG engineer installed Consult 3+ plus V235 version via Teamviewer. He repeated and this time no more stuck issue. Programming went fine.
So the vxdiag vcx se head will work with NERS and will flash the internal combustion engine and transmission, just need to make sure use proper Consult 3+ software version V235.
Contact us if you have the same problem. Providing your order info. and serial number so that we will send Consult3 plus V235 software for free.
2. VNCI RNM device
VNCI RNM currently is compatible with Nissan Consult 3 Plus V231 software. V235 coming soon. Since the device is compatible with original Nissan VCI driver, it is play and play.
It has no problem working with Nissan subscription for online programming. We haven’t got any negative feedback yet.
VNCI Nissan programming example
VNCI RNM is also compatible with Renault and Mitsubishi software.
Both devices supports Nissan online programming with subscription. VXDIAG uses its own driver but allows to add more car brand license.
VNCI uses original driver but it is not able to add more license. All depends on your need.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.