Free ODIS 4.0.0 for VAS 5054A and VXDIAG VCX NANO 5054

Here obdii365.com provides VAS 5054A VAG diagnostic tool software ODIS-S v4.0.0 free download resources and try it at your own risk.

Free download ODIS 4.0.0 software:

http://pan.baidu.com/s/1eR35NsI?errno=0&errmsg=Auth%20Login%20Sucess&&bduss=&ssnerror=0#list/path=%2FOdis%20400

https://mega.nz/#F!2dY3lYSA!ZPUpmEl8kcldN7Q9TUVOog (new ODIS-S 4.0.0 ONLY no launcher)

Note: download links above come from the AP community; not tested yet & with unknown security

For sake of safety, tested old versions should be a better choice:

ODIS 3.0.3 for VW/Audi/Skoda/Seat/Lamborghini and Bentley

ODIS 2.23/2.22

ODIS 2.23 for VW Imports / Faw.
ODIS 2.22 for VW Shanghai and Skoda.

All works perfect with vas 5054a scanners or vxdiag vcx nano 5054 diagnostic tools: bothdiagnostics OK, key programming and offline flash via vxdiag nano 5054 OK)

Odis 4.0.0 update news:

This release contains new features and bug fixes.

New functions

 Support for Windows 10 operating system

 Performance optimization in the diagnostic entry

 Detection of the VAS 6154 via subnets

 Support for non-converging measurements in the GFF

 Integration of the brand Bugatti

Bugfixes

 Deviation in the EcuCom job for “ECU coding” KWP2000

 ODIS installation error message – Could not call proc – Actia PDU API

 Flashing with large data container, flash session is not started

 Fuel system can not be vented // Level not readable

 Flash abort ERROR PROGRAMMING at Audi A1 Bremse (TPI 2033217/3)

 ODIS crashed when switching from USB to Bluetooth

 Bluetooth connection type: No new connection was established after the

diagnostic test was again within range of the VAS5054A.

 Crash at application start

 Update to 3.0.2 fails with ODS4010E: UpdateProcess failed with 11

 Query error memory hangs: “Read control units (33%)”

 Connection setup when changing from Bluetooth to USB takes too long

 Authentication problem in WLAN infrastructure mode with RADIUS server

 VAS 6154 is searched for on the wrong interface after completion of the

diagnostic session

 ODIS service SingleBuild installation, setup message “Runtime Error” for

recovered testers

 DA_14 in the AU48X DSD not possible

 VCI 5054 Connection termination for Windows user change

 ODIS Interface texts: German texts have been deleted from the XML files

(vaudas.texts)

 ODIS Service does not display the version of the diagnostic data for MAN in the

correct format.

 Calibration instruction must be adjusted

 Buttons are displayed partially in the wrong language (German instead of

English).

 The symbol of the status icon changes with the ODIS close

 Buttons to start the JRC and choose your own exam is missing

 The date in disclaimer with EN-US language is not displayed correctly

 In the installation dialog, the language en_US is displayed twice

 Speech caseback leads to corrupt feedback file (invalides XML)

 Vehicle project VW VIN can not be opened // ODS8003E Execution in system

state PROJECT_OPENED not possible.

 VCI-Number on DISS-protocol

Vehicle restrictions

 For brand AUDI, the Flash mode is supported.

 For brand Volkswagen PKW, the Flash mode is only partly supported. The

usage is only allowed if described in TPI.

 For all other brands, Flash mode is restricted.

Supported Vehicles

All supported vehicles are listed below.

AUDI:

 All AUDI-Models

Volkswagen:

 All Volkswagen-Models

Volkswagen Nutzfahrzeuge:

 All Volkswagen Nutzfahrzeuge-Models are supported.

 Only immobilizer components in LT2 vehicles can be diagnosed.

Seat:

 All Seat-Models

Skoda:

 All Skoda-Models

Bentley:

 All Bentley-Models

Lamborghini:

 Gallardo from MY09-MY14 (only for Immobilizer and Radio Pin)

  Aventador

  Huracán

VAG ODIS 4.0 software tested ok by some diy users; NOT by the professional!!!!!!

Good luck with odis 4.

http://blog.obdii365.com/2017/02/13/vas-5054a-odis-4-0-0-for-win-10-free-download/