Download and Install GM GDS2 2024.05.08 Software

 Latest GM GDS2 2024.05.08 software was tested working with VXDIAG GM scanners (VCX NANO GM, VCX SE, VCX DoIP and VCX FD GM series.)

Free to try the software with other tools.

 

Software version:

GDS2 V22.6.01200
GM Global V2024.05.08

GM Global V2024.05.08
GM China V2023.10.12

Opel/Vauxhall V2023.4.0

Supports some Buick Cadillac Chevrolet models till year 2025.

 

Where to download GDS2 2024.05 software?

 

Download Link

 

How to Install GDS2 2024.05.08 and Tech2win?

on Windows 10 64bit.

 

Main steps

Install GDS2

Install DPS patch

Install Tech2win

Install VX Manager

Run Software

 

 

Procedure:

Procedure:

1.

Download and unzip software folder
Open GDS2 folder
Install GDS2AutoInstall.exe until completed

2.

Install 2.gm_installer.exe to install DPS patch

Then delete DPS shortcut on desktop.

NOTE: The gm_installer.exe here is used as DPS patch for GDS2.

If not installed the DPS patch, the system will report PC Software Installation Error when running GDS2 (image below).

You can also install regular DPS 4.52 software but it will ask for license. Need to purchase license from official. If don’t want to purchase license, use this dps patch solution.

3.

Run Tech2win folder
Install AutoInstall.exe
If Windows asks to install virual com port driver
Press Install
Tech2win Install OK

4.
Install VX Manager 1.8.9

Connect vxdiag vcx nano gm scanner and check device is well-connected

Go to Diagnostic, Install GM GDS2/T2W driver

Update firmware and license to latest version.

 

5.

Run GDS2 from patch on desktop

Start diagnosis

Video reference:

How to Set up Vediamo 5.01.01 for VXDIAG VCX SE?

 Some users follow the forum guide to set up the VXDIAG VCX SE Benz with Vediamo 5.1. Vediamo will recognize the VXDIAG but when connecting to ECU module (i.e MED40), they will get the error that the connection with the ECU cannot be established.

Here is the clue.

Vediamo 5.01.01 need a special fix file (slave file) to configure as J2534.

 

Here we share the Vediamo 5.01.01 software with a salve file for VXDIAG scanners.

vediamo 5.01.01 for vxdiag

Only this you need.
Vediamo/Cesaer/Driver – copy paste the file here and replace him
In program files (x86)Vediamo/Cesaer/Driver – copy paste the file here and replace him
And then connect the device run as administrator Vediamo
Update and select only eCom port
Again Update.

Job finish.

Tested VXDIAG working well with Xentry 12/2023. You can use the CBF files from Xentry with Vediamo.

Our engineer tested on Mercedes ME9.7 ECU.  Works great.