Free Download V126 VXDIAG VCX NANO Ford IDS

 Both Ford and Mazda IDS V126 has been tested and verofiied working no issue on July 2022.

 

Software version:

Ford IDS V126.01

Mazda IDS V126.01

 

Operating system: Win7, Win8 and Win10

Attention: Mazda and ford ids must be installed on different operative systems. On the same computer but on different windows(dual boot) only. Or on different computers

 

Device affected: vxdiag vcx nano ford/mazda USB/WiFi version, VXDIAG VCX SE Pro, VXDIAG Full, Ford VCM2 clone using vx manager etc

 

 

Free download Ford IDS V126

https://mega.nz/folder/6dwzgaJR#XW2q1xPdbgKV4XtZQqkB0w

File including:

IDS-126.01_full.exe
VCI_Software_1.0.0.10.exe VX Driver
VX Manager 1.8.9.0601.exe

Free download Mazda IDS V126

https://mega.nz/folder/iQp1UACZ#d4ey2cWHmaEMf9n2dTcTAQ

File including:

IDS-126.01_full.exe
VX Manager 1.8.9.0601.exe

Free download Ford and Mazda IDS Patch

https://mega.nz/folder/OV4RRC6B#seCWP6UCzOPWEDYlQxZ1iQ

** INSTALLATION GUIDE WITH EASY STEPS INCLUDED **

 

Ford IDS native install languages: Chinese (traditional, simplified), Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian,

Italian, Japanese, Norwegian, Polish, Portuguese, Romanian, Russian, Slovenian, Spanish, Swedish, Thai, Turkish

 

Ford IDS Installation:

1. Install Ford IDS-1**
2. Wait for the installation of Ford IDS – 1**, and restart the computer
3. Install the Ford original VCI software_ 1.0.0.10.exe
4. Install VX manager and Ford IDS driver
5. Wait for VX manager and Ford IDS driver installation to complete
6. Connect VCX device and install idspatch
7. Use idspatch to open IDs and start diagnosis.

 

Mazda IDS Installation:

1. Install mazdaids-1**
2. Wait for mazdaids – 1** installation to complete and restart the computer
3. Install VX manager and Ford IDS driver
4. Wait for VX manager and Ford IDS driver installation to complete
5. Connect VCX device and install idspatch
6. Use idspatch to open IDs and start diagnosis.

How to Use VXDIAG VCX NANO with ForScan, FJDS, FDRS?

 Vxdiag vcx nano for Ford/Mazda has been tested as a good j2534 passthru interface. VCX NANO works perfectly with IDS, ForScan, FJDS and FDRS as a J2534 pass-through device.

IDS (Ford Integrated Diagnostic System) allows dealership technicians to diagnose and service Ford, Lincoln, Mercury vehicles. As the new diagnostic tool, IDS will be required to perform diagnostics on future model year vehicles.

FJDS ( Ford J2534 Diagnostic Software) is the new version of Ford Module Programming, and the interface is clunky like IDS. FJDS does not have the same level of diagnostics as IDS but if you need to program modules, change some parameters, etc

FDRS (Ford Diagnostic & Repair System) is the official dealer diagnostic and repair software used by technicians at your dealership. It can test (run diagnostics) on various modules, update module software, load/reload as-built configurations etc.

ForScan is mostly used for module configuration (it cannot do module software updates).

• Set up VXDIAG with Ford IDS
• Set up VXDIAG with Ford ForScan
• Set up VXDIAG with Ford FJDS/ FDRS

Set up VXDIAG VCX NANO with Ford IDS

The latest version IDS for VXDIAG goes to V124 (till Feb, 2022)

Free Download VXDIAG Ford IDS V124

https://mega.nz/folder/6dwzgaJR#XW2q1xPdbgKV4XtZQqkB0w

Including
FordIDS-124.01_full.exe
VCI_Software_1.0.0.10.exe
VCI Manager (Ford) 20.11.24.exe

Ford IDS V124 Installation Instruction 

1. Install IDS Software
2. Install VCI_Software_1.0.0.10
3. Install VCI Manager(Ford) 20.11.24

Install Ford IDS-124
Wait for the installation of Ford IDS – 124.01, and restart the computer
Install the Ford original VCI software_ 1.0.0.10.exe
Install VX manager and Ford IDS driver
Wait for VX manager and Ford VCI driver installation to complete
Connect VCX device and install idspatch
Use idspatch to open IDs and start diagnosis.

 

How to set up and install VXDIAG Ford IDS on Windows 10?

 

 

Set up VXDIAG VCX NANO with Ford ForScan

This is how to set FORScan to detect and work with Vxdiag Vcx Nano for Ford.

First of all install VX Manager and this passthru driver:

And second configure ForScan how this image:

Better run Forscan as administrator and select J2534 adapter as VXDIAG

It’s run perfectly

Update the VCX manager and drivers to the latest version.

 

Set up VXDIAG VCX NANO with Ford FJDS/FDRS

Here is the procedure with FDRS. FJDS is very similar, just use different license. Make you you have the required FJDS license from Motorcraft.

Tools you will need:

– Windows PC with 4GB RAM or greater, running Windows 10 natively (Macs running Windows bootcamp or other VM based solutions are known to cause issues)
– VXDIAG VCX Nano Ford interface
– USB Flash drive 64GB or larger (must be formatted to exFAT)
– 12V Automotive Battery Charger/Maintainer (can be purchased from Amazon)

Software you will need:

– VX Manager (installs driver for your VXDIAG VCX Nano device)
– Ford Diagnostic & Repair Software (commonly known as FDRS)

Software installation (step-by-step):

1) Download the latest VX Manager installer from here
2) Start VX Manager installation, when prompted select PASSTHROUGH – J2534

DO NOT SELECT FORD/MAZDA – IDS. Using this IDS emulation can brick your ECU during the update process (learned the hard way)

3) Connect VCX Nano Ford device to your PC using the supplied USB cable and launch VX Manager. The tool should recognize the device. If there is a device firmware available, update the device firmware

4) Download and install FDRS software from here. You will need a license to run this software and can be purchased here (2-day FDRS license cost $50)
5) Launch FDRS, you will be prompted to enter the license that you have just purchased. Login using your credentials created on Motorcraft website. Make sure you select Non-Dealer Motorcraft as User Type

6) Connect your VXC Nano Scanner to your truck’s ODBII port and connect the USB cable to the PC running FDRS. Once FDRS Device Manager pops up, make sure you select Other Device, in the drop-down dialog select VXDIAG – J2534.

After this you should be greeted with this screen, meaning you are ready to go!

The icons at the bottom should be all green with battery voltage shown

Running Network Test (Intial Scan)

1) Turn Ignition On, Engine Off
2) Click Read VIN from vehicle
3) Click Go to initiate Network Scan

Once completed a new tab called Toolbox will appear at the top of your FDRS screen:

 

On the left hand side you will see all modules detected on your truck. The ones that responded positively will be marked green. On the right hand side notice the SW Updates tab. Head over here to see all available SW updates for your modules.

http://blog.obdii365.com/2022/02/18/set-up-vxdiag-vcx-nano-for-ford-ids-forscan-and-fdrs/#3

How to Enable VXDIAG VCX SE Benz with Xentry Passthru?

 VXDIAG VCX SE Benz can work on Benz C6 mode with Xentry OpenShell. It can also work on Passthru Mode.  Here is the tip to set up vxdiag vcx se Benz to work on Passthru mode with Xnetry, DTS Monaco and Vediamo.

 

Benefits of the vcx se over Openport as Passthru:

• The main reason for buying vxddag is that it has DoIP for new cars.
• vcx se connects via WiFi and it’s very convenient
  there is already a Type C connector and it is held very tightly
• vxdiag will also work on Passthru Mode
• vxdiag allows firmware update and being able to add other brands to the device

We will show you how to install drivers and connect via WiFi.  There is no difference through the cable USB connection.  We already tested the speed connections both via cable and via WiFi.

It is the same.

 

VXDIAG VCX SE Driver Setup for MB Xentry PassThru J2534:

First of all, download the latest version of the driver vx manager here

VX Manager driver 1.8.6

 

Install vx manager

It has many programs to install. In this case, we install Passthru-J2534 program only.

vcx se was connected, vx manager detects device information

Passthru driver has been installed. DON’T install Benz C6 driver. If you have installed C6 driver, Uninstall it.
Update License
Update Firmware

Pair vcx se with WiFi
WiFi password is :123456

ReConnect Device

Connect vcx se benz with vehicle via OBD socket

Run Xentry Diagnosis program

Choose vxdiag-j2534 as passthru device

You can start diagnosis and coding with vcx se passthru software.

 

Disclaimer: We don’t have Xentry passthru software for sale. If you want to use Vxdiag passthru with Mercedes you need to buy a full Mercedes license. Vxdiag passthru license is not a general j2534 license for all brands.

www.obdii365.com

http://blog.obdii365.com/2022/02/14/set-up-vxdiag-vcx-se-benz-as-xentry-passthru/

Download V2022.01 VXDIAG Subaru SSM3 & SSM4 Software

 The Subaru factory diagnostic tool costs thousands. The VxDiag Subaru is the perfect alternative and it helps you out. It is much cheaper than Subaru's real deal. The 2022 version software has been tested and verified working without issue by obdii365.com technician.

 

Software version:

• SSM3 2021.01;
• SSM4 V28.6.0;
• FlashWrite2 V1.3.9
• Subaru Patch

Operating system:

• Windows 7
• Windows 8
• Windows 10

Compatible device: 

• VXDIAG Subaru Multi Tool,
• VXDIAG VCX SE Subaru

Language:

• SSM3 Language: English, German, Spanish, French, Italian
• SSM4 Language: English, Japanese, French, German, Spanish, Italian, Russian, Chinese, Polish

 

 

Free Download VXDIAG Subaru SSM3 SSM4 2022.01 Software

https://mega.nz/folder/ucIEhR7J#QUGAbagyLLsCslE585Fu2Q/folder/KcIiBThY

Contains: SSM3 2022.1; SSM4 V28.60; FlashWrite2

Free Download Subaru SSM4 Patch (MUST INSTALL PATCH)

https://mega.nz/folder/zJASHJ6b#FgXQQluqoFyVSKkQ2k5KMw

 

SSM3 V2022.01

SSM4 V28.6.0

Installation Steps:

Install FlashWrite setup

Install SSM3 setup

Install SSM4 setup

Install VX Manager

Run Patch

 

Software installation guide is the same as the previous 2020 version, check

https://youtu.be/1eVAQ_NNMeY

SSM3 does not require activation, SSM4 28.6.0 and later version does.

When run SSM4 from patch, it says the product password does not match.

Press OK will bring you a dialog below

Copy Product ID

Run SubaruID program, paste Product ID here

Run SSM4 from patch again. Software is ready to use.

http://blog.obdii365.com/2022/02/09/download-install-and-activate-v2022-01-vxdiag-subaru-ssm3-ssm4/

Program Honda Civic ECU with VXDIAG VCX NANO as J2534 Passthru

 We are going to be testing out the vxdiag vcx nano ford as a J2534 passthru on a Honda Civic 2012.

We got the Honda program (Honda J2534 Passthru ECU Reprogramming) up right now.

and current program id available update system so as we can see there is a update on civic.

We'll press enter to start to control module update

Make sure everything goes good and right now it's programming now you got to remember that you do need a stable internet connection for update.

We are currently at thirty percent I'll hold this here it does take a little bit of time.

The update has been done i'll bring up the bulletin for it later.

I'm not actually connected to the internet because there is a database into the honda program that has specific ecu updates onto it so there was no need for me to actually go in and be online.
So right now as you can tell see all the information that's being transferred onto the password device.

Make sure that you are on a battery maintainer to make sure that the ecu has the proper amount of voltage and amperage going to it at all times because as the updates are being done.

it's cycling through different modules and different modules will be powering up powering down,  and you'll have a different amount of amperage.

that's going to be drawn onto the system so it's very important to always have a battery maintainer onto it.

Go ahead let this run through i'll do this in real time i'm not going to take digging fast forward at all.

I'm just showing you guys that it does actually work as a pass-through device.

So this update is actually going pretty quick.

I was expecting it to take a little bit longer than what it is

so turn the ignition switch to the off position which we'll do right now and don't need to switch the on within 60 seconds.

and here you can see the new calibration file that was into it.  So this was the previous, this one's the new one

and program start number and model civic update description running change

So that's it for that you can print it or you can just exit it

so we'll go to System real quick and in the system search the vehicle does not need an update at this time.

so now we know that all the updates are done for this vehicle with the vxdiag vcx nano for Ford and Mazda IDS, but if you get the vcx nano gm or Toyota it will do the exact same thing.

 

If you were ever thinking of buying a programming device or a beginner entry-level diy at your house type of deal, then the vx nano will probably be your best bet as you can tell it does work now these programs are not free that i'm using you do actually have to pay for these programs to get them working.

www.obdii365.com